Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
Thule's Bed Rider is perfect for carrying bicycles in your truck's bed. It's comprised of a Thule telescoping aluminum crossbar and 2 Thule Low Rider mounts with locking quick releases. The telescoping design lets the Bed Rider fit small to full-size truck beds without drilling, and the Low Rider mounts hold fast keeping your bikes safe and secure. You can also add Low Rider mounts to carry additional bikes.
Protect both your bikes and your pick-up on your next adventure with heavy-duty, adjustable, padded protection. Features - Flexible padding adjusts across a wide range of tailgates and large handle opening provides backup camera visibility - Bikes remain securely in place with integrated bike separation and multiple position strap anchors - Bikes and pick-up trucks are protected during transport with heavy duty vinyl, adjustable padding - Gear can be stored securely, even while driving, due to the inside-facing mesh pockets Technical specifications - Dimensions: 52 x 15.5 x 2.75 inch - Weight: 5.5-pound
Thule's Sidearm is perfect for bikes with non-traditional frame designs or unique fork/hub interfaces because it holds bikes by the wheels only. For fast and easy loading, Thule's ratcheting SecureHook clamps the front wheel, while a ratcheting strap secures the rear. The Sidearm accepts most bicycles including those with 29-inch wheels. This fine bike mount fits on square and round crossbars (sold separately).
Super rugged platform carrier with frame free clamping security for all types of bikes. - Carrier easily folds when not in use and tilts away from vehicle for rear access due to the HitchSwitch lever - Secure bikes quickly without frame contact with the frame free ratcheting arm - Bike to bike interference is eliminated with fully adjustable bike mounts - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters - Includes STL (SnugTite Lock) for locking rack to receiver hitch - Carries 2 bikes - Carries up to 4 bikes with Thule T2 Classic Bike Add-on (sold separately, 2” receiver only)
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
This fork mount roof rack can handle any bike. Really. That bike you’re thinking of? Yes. Featuring the 3 Way fork-mount system, the TRIO can handle any bike you own. Top that off with a slim line design, security system, and rugged good looks, and you have the most complete fork-mount rack ever designed. 3 Way Fork Mount System - 3 Way fork mount system can handle any bike you own - Fits 9, 12, 15, & 20 mm forks with size-specific adapters - Adapters included with the TRIO: 9x100, 15x100, and 15x110 - Additional adapters available Additional Details - Easy Fit: Mounts to most factory and all aftermarket cross bars (max crossbar size: 3.5” wide by 1.5” thick) - Carrying capacity: 1 Bike Capacity (45lbs max) - Aerodynamic & Low Profile - Integrated Cable Lock (locks both frame and rear wheel): Style and security all at seven pounds - Sliding rear tire strap - Weight: 7lbs
Make your home, business, or property really bike friendly with the Bike Valet. This sturdy parking stand holds up to 6 bikes and sports a tough indoor/outdoor textured finish. • 1-inch x 16 gauge steel side rails and horizontal tubes • ¾-inch x 16 gauge steel vertical tubes • Powder-coated finish • Double-sided configuration • Can be bolted down
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Pair of EndCaps for Yakima CoreBar.
Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.
Pair of EndCaps for Yakima JetStream bars.
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
Yakima's Q-Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The Q-Towers automatically adjust to fit your vehicle's roof contours and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.
Bar adapter that allows you to run RoundBar on StreamLine Towers.
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Thru-axle adapter works with WheelHouse to hold wheels with 12mm/15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front Hubs TECHNICAL SPECS - Weight: 0.44 lbs - Dimensions: L 9.00” x W 0.75” x H 2.00”
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
$12.99 - $13.99
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Saris' Trap Fork Mount can be bolted anywhere you need to hold a bike. It secures your bike's fork dropouts with a stout 9-mm quick-release skewer. The Trap is made of powder-coated, light, durable aluminum. A hole in its body allows your bike to be locked with a cable (sold separately).
Secure peace of mind and your trunk rack to vehicle with our Trunk Rack Lock. - Secure bike rack to vehicle to deter theft. - Cables secured within closed trunk. - Includes 8 ft. cable. - Includes 2 keys.
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
Fat bike skewer and thru axle tube adapters for the Kuat Trio roof rack.
Page 1 of 2 Next page