Filter By:
- Lubes/Cleaners (12)
- Tools (27)
- Workstands (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance

$8.00
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

$10.15
Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates.
- Specifically designed for lubricating chains
- Applicator is not included or needed because of the product's consistency

$36.99
$50.00
26% Off
This Zee Cage II was designed with an integrated EMT Cage Mount MTB Tool that has all of the trailside necessities required to get you out of a jam on your ride. For the cage itself, you'll find it to be respectably lightweight, and to have incredible holding power for when the trails get rough. For easy bottle access, we also gave it a unique side-loading design that allows you take pulls from the right or left-hand side depending on placement.
- SWAT design allows for storage and tool integration.
- Reinforced composite material improves durability without adding weight.
- Includes EMT Cage Mount MTB Tool with 3, 4, 5, 6, 8mm, T25 Torx, and #1 flathead screwdriver.
- Right-hand loading on the down tube—left-hand loading on the seat tube.
- Sleek, minimalist design with razor-sharp graphics.

$30.00
- Required to bleed Reverb 1x remotes
- Compatible with Standard RockShox bleed kits
- Included with remote upgrade kit and Reverb 1x post
- Not compatible with SRAM brakes bleeding edge fitting

$7.99
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed.
- All-purpose lube
- Cleans and lubricates simultaneously

$17.99
- Consumer grade water-based silicone bicycle polish
- Safe on all parts including carbon
- Protects against uv rays, water and dirt

$9.44 - $43.58
ProGold ProLink is designed to shed dirt, mud, and abrasives, and reduce tacky build-up in all climates.
- Smoother shifting, quieter drive train
- Repels moisture and reduces oxidation and corrosion
- Disperses water and resists wash-off
- Will not build up or get tacky
- Works well in all climates
- Longer chain and sprocket life
- Long-lasting
- Can be used as a dry lubricant
- Environmentally friendly
- Available in: 4 fluid-ounce drip, 8 fluid-ounce aerosol, 16 fluid-ounce pump, and 32 fluid-ounce.

$14.99
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide.
AWS-1 FEATURES
- 4mm, 5mm, and 6mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit

$16.95
Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.

$15.99
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

$10.95
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

A sturdy bicycle cleaning brush with a unique angled and contoured shape – perfect for cleaning cassettes and freewheels as well as tires. With a strong ergonomic handle and stiff nylon bristles, the GSC-4 scrubs away the toughest muck and mess.

$5.95
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

$32.95
The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).

$29.95
Park's Heavy-Duty Tire Levers handle the toughest tire-and-rim combinations including difficult downhill and freestyle tires. Their specially designed tips engage the tire bead so it can be removed with just two levers. Plus, these beefy, forged-steel levers are a full 8-inches long for superior leverage.

$17.95
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

$18.00
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

$20.95
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

$219.95
"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing.
The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.*
The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop.
NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.?
- Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts
- Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts
- Durable textured powder coat finish
- Maximum weight capacity: 80 lbs. (36 kg)
- Height adjustable from 39"" to 57"" (990 mm–1450 mm)
- Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm)
- Folds down to 44"" x 14.5"" (1140 mm x 370 mm)
- Weight: 16 lbs. (7.2 kg)
- #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"

$7.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

$40.00
Park's Professional Pedal Wrench features an angled, oversize head for maximum leverage. It has two 15mm wrenches at different angles, so you can maximize your leverage, and a long, round, vinyl-coated handle that won’t dig into your hand the way flat wrenches do. There's even a hole in the end for hanging the wrench on your toolboard.

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools.
• Made from hardened alloy tool steel
• Uses 7mm or 9/32" 12 pt box end/socket
• Sold singly or in pairs

$10.95
• Updated to fit better in the hand with a more rounded, smoother shape
• The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market
• Nickel plated for years of service
• Designed for the home mechanic.
FIts the following size spoke nipples:
• .127" (3.23mm)
• .130" (3.30mm)
• .136" (3.45mm)

$20.00
Bike Protect is the ultimate liquid bicycle protection. Preserve and freshen your bike with Bike Protect's incredible water dispersing action! It's a perfect 'all over', after-wash corrosion inhibitor due to its extremely high oil content. This increased oil content creates the finest bike protection spray on the market. It drives out moisture and leaves a sparkling, non-sticky protective layer on your frame, drive chain, metal parts, and paintwork. It's ideal to spray onto your chain to drive out moisture before you apply any of the brilliant Muc-Off chain lubes. Bike Protect doesn't just disperse water after you've given your bike a good clean. It also prevents dirt adhesion between washes and reduces future maintenance time as well as helping reduce friction, wear, and energy consumption.
- High performance formula leaves dry, non-sticky, protective film
- Safe on frame, metal parts, plastics, rubber, paint, and carbon fiber
- Drives out excess moisture
- Prevents dirt adhesion
- Light lubricant coats moving parts
- Quick and easy to use
- Aerosol Spray
- Ideal for Road Cycling, Cyclocross, MTB, & Fat Bikes
- Provides the ultimate performance in freezing conditions
- For chains, cables, shifters, derailleurs, pedals, & cleats
- Incredible durability
- Pipette system for easy application

$15.00
Fingerprints and glossy marks are now a thing of the past. Matte Finish Detailer has been specifically developed for satin matte paints, matte finishes and matte vinyl wraps. The premium-grade formula will leave any matte surface with a streak and gloss-free protective finish that reduces dirt adhesion.
- Quick to use spray developed specifically for matte finishes
- Leaves a non-sticky, streak and gloss-free protective finish
- Carbon Fiber safe
- Biodegradable

$25.00
- Advanced fluor-polymer polish and protectant
- Removes imperfections and fills minor scratches
- 3 wax blend for long lasting, ultra deep shine
- Clear coat safe, no powdery white residue

$5.00
Converts Presta valves for use with Schrader-compatible inflation devices.
- Machined aluminum is lighter than brass alternatives
- Rubber O-ring provides a secure seal to prevent air leakage
- Also sold as a card of 12

$69.99
The Dual Insert Kit is the ultimate stealth-mounted mountain bike tool set which features a pair of our innovative tools that discretely and securely hide in the ends of a handlebar: the Tubeless Insert Kit and the Tool Insert Kit.
The Tubeless Insert Kit is constructed from lightweight, durable machined aluminum and features a hardened stainless-steel reamer. The kit is easily accessible for quick tire repairs and comes with five high-quality tubeless plugs that can also be stored inside its body.
The Tool Insert Kit is constructed from lightweight, durable machined aluminum and features hardened steel tool bits. The kit is easily accessible for quick repairs and comes with 11 different tool bits ideal for today’s modern bikes.
The Kits also doubles as bar-end plugs and come with three differently sized O-ring fasteners to ensure a secure fit inside most handlebar openings.
Tool Insert
- Machined Aluminum Bar plug tool kit
- Hex bits: 2,3,4,5,6,8, 10mm
- Phillips bit
- T10,T25,T30
- Fits all standard MTB handlebars
Tubeless insert
- Machined aluminum bar plug tubeless repair kit
- 5 tire plugs
- Combined reamer and insertion tool
- Fits all standard MTB handlebars

$40.00
The V Pro bike multi tool series includes a refined collection of tools developed for today's modern bicycles. Each model is designed and manufactured in-house and engineered to efficiently repair most road or trailside mechanicals. The machined steel tool bits are now longer and introduce our Black Anti-Corrosion technology, which provides superior corrosion resistance. The machined aluminum side plates are anodized black and deliver a compact, comfortable feel during use. With unmistakable Lezyne styling, the lightweight V Pro tools offer amazing value and functionality for all types of cyclists.
- CNC 7075 alloy side plates
- Anti-corrosion black chrome vanadium fastening hardware
- Enhanced anti-corrosion black chrome vanadium bits
- Hex 2/2.5/3/4/5/6/8mm
- T10/T25/T30
- Phillips
- Lightweight chain breaker tool
- Spare master link storage
- 114g

$25.00
Need to give your bike some quick attention before you head out the door? Give it a quick shot of Finish Line's 1-Step Cleaner And Lubricant. It loosens and removes grime, while at the same time laying down a thin layer of low-friction lube that reduces drivetrain noise and premature component wear. Keeping your bike running smooth has never been easier!
Page 1 of 2
Next page