Filter By:
- Bar Ends (1)
- Bottom Brackets (12)
- Brakes/Levers/Pads (55)
- Cables (12)
- Cassettes/Freewheels (24)
- Chainrings (25)
- Chains (20)
- Cranksets (27)
- Show More Categories
- Derailleurs (44)
- Groups (1)
- Handlebar Grips/Tape (20)
- Handlebars (6)
- Headsets (1)
- Pedals (27)
- Saddles (35)
- Seatposts (6)
- Shift/Brake Combinations (10)
- Shifters (18)
- Shocks (3)
- Stems (2)
- Other (37)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$11.99
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

$15.00
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull.
- ReachAdjustment
-- Qwik-Adjust Barrel Adjuster
Bend Zone

$20.00 - $30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$30.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$30.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

$34.00 - $35.00
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

$9.00
Our Seatpost Adapters quite literally fill the gap, and with over 25 sizes available, the combinations are endless. These Seatpost Adapters are compatible with static, suspension and dropper Seatposts.

$35.00
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 12 mm
• S.H.I.S Lower: EC34
• S.H.I.S Upper: EC34
• S.H.I.S. Stem Clamp Diameter: 28.6
• Upper Stack Height: 18 mm
• Weight: 165 g

$54.99 - $60.00
The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

$104.99
Inspired by the sleek and deadly lines of a Copperhead snake, the sweeping center channels of the Copperhead stem wrap around the entire stem to minimize material while delivering the a stong steerer mounted stem. DEITY's focus on durability and dedication to the symmetry between strength and weight is showcased in the balance of style and function that is the Copperhead stem.
- Designed for all applications from All MTN to Slopestyle and anything in between
- CNC Machined from a solid block of 6061 T6 Aluminum
- Exceptionally detailed chamfered edges and channels throughout
- 55mm wide clamping platform

$34.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap

$42.00
Dimension Steerer Extender adds 2 to 3-1/4" height to steerer.
- Extender clamps to steerer; stem clamps to extender
- Adds 2 to 3-1/4-inch height to threadless steerer
- Includes top cap and long bolt
- 40mm of threadless steerer is required for proper installation
- Do not stack steerer extenders; no more than one steerer extender recommended per bike
- WARNING: Dimension Steerer Extender is not recommended for use on forks with carbon fiber steerers

$59.99
Dimension Freewheels are excellent drivetrain component replacements. With smooth shifting performance and durable construction, they'll help breathe new life into older bikes.
- A must-have in any bicycle service department
- One-piece design
- Shimano index compatible
- Works with most friction shifters
- Suitable for use with e-bike drivetrains

$19.99 - $20.00
Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included.
- 60 Grams
- Standard Grip Length – 5 1/8"
- 32mm
- Weight plus or minus 5%
- Made for 22mm bars (can fit applications down to 19mm)
- Bar Plugs included
- *Install Bar Plugs first for the protection of grips and ease of installation

$34.99
- Lightweight silicone grips that conform to your hand for maximum grip and shock absorption to reduce hand fatigue and arm pump
- UV resistant and non-porous, they will not fade or harden
- Non-slip grip compound that stays put even when wet

$37.99
- Sturdy Cr-Mo double bolt adjustment seat clamp allows for a precise and secure hold on the saddle in any position

$25.00 - $56.00
FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain.
- Precision CNC machined AL7075/T6 alloy

$6.99
Jagwire's Basics Road Brake Pads feature their tried-and-true all-weather compound for excellent braking and durability.

$10.00
Compatible with linear-pull and cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability. They come in standard Black plus Yellow, Red, Pink, Blue and Gray for adding a little style to your ride.

$15.99
Jagwire's Road Sport Brake Pads feature their tried-and-true Pro Series compound for excellent braking and durability. The pads are cartridge-style for easy replacement without losing your brake shoe position and there are wheels guides on the shoes to help when you're putting a wheel back on.

$17.99 - $20.00
Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

$20.00
Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

$22.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

$29.99 - $32.00
Jagwire Sport Mineral Hydraulic Hose Kits feature a durable, flexible reinforced layer surrounding a low-friction inner tubing to deliver light brake lever action and trustworthy braking power. Offered as single hose kits for individual brakes or in bulk boxes for workshop use, Sport Mineral Hydraulic Hose is available for most popular road and mountain hydraulic disc brake systems that use mineral oil brake fluid.
- High performance hydraulic hose provides effective braking power and control
- Kits include hose and necessary fittings for one brake lever and caliper system
- Contains 2000mm HPP hydraulic hose, needle insert, compression bushing, compression nut and seals for the listed compatible brake models
- Compatible with Shimano Dura Ace (R9120, R9170), Ultegra (R8020, R8070), 105 (R7070), GRX (RX810, RX400), and similar brakes
- For use with mineral oil brake systems only

$7.00 - $18.00
The KMC S1 is a single-speed chain suitable for use with internally geared hubs, or any single speed drivetrain.
- High pin power with reinforced durability
- Offers a quieter riding experience
- Anti-drop design
- Inner plate chamfering helps to provide fast and smooth shifting
- Internal gear hub system compatible
- Links (links): 112
- Color: Silver
- Width: 9.3mm
- Drivetrain Speeds: Single Speed 1/2 x 1/8-inch
- Half Link Chain: No

$24.99
With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.
Page 1 of 13
Next page